6760 ServerNet/DA Manual

Installing and Moving the 6760 ServerNet/DA

6760 ServerNet/DA Manual—424879-003

2-2

Installation Overview

The 6760 adapter provides communication between the ServerNet fabrics (X and Y) of

a NonStop S-series server and external disk drives, external tape drives, and Open

SCSI devices.

The 6760 adapter is designed to use F-SACs or S-SACs. Currently you cannot mix

different SAC types or different device types on the same 6760 adapter.

The 6760 adapter is shipped with the SACs needed for your system. If the proper

number of SACs are not already installed on the 6760 adapter, contact your service

provider before beginning the installation.

To install a 6760 adapter, you must perform the following tasks.

Task Information Page

1. Decide which enclosure slot you want the

adapter installed in.

Plan the Installation

2-3

2. Document this information on a blank

configuration form.

Fill Out an Installation Form 2-6

3. Install the adapter in the slot. Install the Adapter 2-9

4. View configuration information View Configuration

Information

2-13

5. Connect the cables to the proper SACs on

the 6760 adapter.

Connect External Devices 2-14

6. Test the adapter, SACs, and external disk

drives.

Test the 6760 Adapter 2-18