6760 ServerNet/DA Manual

Installing and Moving the 6760 ServerNet/DA
6760 ServerNet/DA Manual—424879-003
2-8
Fill Out an Installation Form
Figure 2-3 is an example of a filled-out 6760 Adapter and Modular Tape Subsystem
Configuration Form. The cable ID tag contains the adapter location and tape
module ID.
Figure 2-3. Filled-Out 6760 Adapter and Modular Tape Subsystem Configuration
Form
028CDT .CDD
SAC Name
SAC Number
Enclosure/Slot
Cable ID Tag
Comments
SAC Name
SAC Number
Enclosure/Slot
Cable ID Tag
Comments
SAC Name
SAC Number
Enclosure/Slot
Cable ID Tag
Comments
SAC Name
SAC Number
Enclosure/Slot
Cable ID Tag
Comments
6760 Adapter and Modular Tape
Subsystem Configuration Form
System Name
Enclosure/Slot Number
Physical Location of Enclosure
6760 Adapter: There are 1, 2, 3, or 4 SACs associated with this adapter.
(circle one)
Dat
e
/ /
31200
\SAMPLE
02/53
Room 1307
SNDA.Sac-1.Grp-2.Mod1.Slot-53
02/53
G02S53SAC1DMA1
SNDA.Sac-2.Grp-2.Mod1.Slot-53
02/53
G02S53SAC2DMB2
NOT CONFIGURED
NOT CONFIGURED
12
Location of Module
______________
A1
Tape Module ID
____
Room 1307
Location of Module
______________
Disk Module ID
____
Location of Module
______________
B2
Tape Module ID
____
Room 1307
Unit 4 Unit 5
Logical Device Name: Logical Device Name:
$ $
TAPE1
CDT021.CDD
Location of Module
______________
Disk Module ID
____
Unit 4 Unit 5
Logical Device Name: Logical Device Name:
$ $
Unit 4 Unit 5
Logical Device Name: Logical Device Name:
$ $
TAPE0
Unit 4 Unit 5
Logical Device Name: Logical Device Name:
$ $