6760 ServerNet/DA Manual

Installing and Moving the 6760 ServerNet/DA
6760 ServerNet/DA Manual—424879-003
2-22
Installing and Removing External Devices
Figure 2-9 shows how to remove a 6760 adapter from an enclosure.
Installing and Removing External Devices
After installing the 6760 adapter, refer to the following documents for specific
information about installing or removing the external devices controlled by the 6760
adapter.
.
Figure 2-9. Removing a 6760 Adapter
Device Document
External disk drives in the 45xx modular disk
subsystem
45xx Modular Disk Subsystem Manual for
G-Series Releases
External tape drives in the 5190/5194
modular tape subsystem
5190/5194 Modular Tape Subsystem
Manual
External tape drives in the 9490 tape
subsystem
StorageTek 9490 Technical Reference
Manual
Other devices the manufacturer’s documentation
009.CDDCDT
1. Press the ejector button and lift the ejector to
disconnect the adapter from the backplane.
2. Slide the adapter partially out of the slot.
3. Attach ESD grounding clip to the adapter and
slide the adapter all the way out of the slot.