6760 ServerNet/DA Manual

Contents
6760 ServerNet/DA Manual—424879-003
iv
Examples (continued)
Examples (continued)
Example 3-4. INFO DISK, CONFIG Display 3-10
Example 3-5. INFO TAPE, DETAIL Display 3-16
Example 4-1. STATUS ADAPTER, DETAIL Display for Disk Drives 4-3
Example 4-2. STATUS ADAPTER, DETAIL Display for Tape Drives 4-5
Example 4-3. STATUS ADAPTER, DETAIL Display for Open SCSI Devices 4-7
Example 4-4. STATUS DISK, DETAIL Display 4-10
Example 4-5. STATUS TAPE, DETAIL Display 4-14
Example D-1. PERIPHERALS Paragraph D-2
Figures
Figure 1-1. Two 519x Tape Drives Mounted in a Modular Storage System 1-2
Figure 1-2. Two 45xx Disk Modules Mounted in a Modular Storage System 1-3
Figure 1-3. The 9490 Tape Subsystem 1-4
Figure 1-4. 6760 Adapter With Four 6761 F-SACs Installed 1-7
Figure 1-5. 6761 F-SAC Connected to Two 5190x Drives 1-8
Figure 1-6. 6762 S-SAC Connected to Two 519x Drives 1-9
Figure 1-7. 6761 S-SAC Connected to a 9490 Tape Drive 1-9
Figure 1-8. Fault-Tolerant Paths to the Same Disk Module 1-12
Figure 1-9. Fault-Tolerant Paths to Two Different Disk Modules 1-13
Figure 1-10. Fiber-Optic Extenders for a Tape Drive 1-15
Figure 1-11. Front Panel on SCSI Extender 1-16
Figure 2-1. Slot Locations for 6760 Adapters 2-3
Figure 2-2. Filled-Out 6760 Adapter and Modular Disk Subsystem Configuration
Form 2-7
Figure 2-3. Filled-Out 6760 Adapter and Modular Tape Subsystem Configuration
Form 2-8
Figure 2-4. LEDs on the Faceplate of 6760 Adapter With Four 6761 F-SACs 2-10
Figure 2-5. Installing a 6760 Adapter 2-13
Figure 2-6. Connecting a Fiber-Optic Cable to a 6761 F-SAC 2-15
Figure 2-7. Cable-Management Hardware 2-16
Figure 2-8. Connecting a SCSI Cable to a 6762 S-SAC 2-17
Figure 2-9. Removing a 6760 Adapter 2-22
Figure 3-1. $DISK02 Two-Adapter, Two-Module Configuration 3-3
Figure D-1. $DATA00 in a Four-Controller Configuration D-3
Figure D-2. Configured Cable Paths (How Disk Modules Should Be Cabled) D-7
Figure D-3. Actual Cable Paths (Does Not Match Configuration) D-7