6760 ServerNet/DA Manual

Configuring the 6760 ServerNet/DA and Attached
Devices
6760 ServerNet/DA Manual—424879-003
3-11
Example: INFO DISK, CONFIG Detailed Report
The report in Example 3-4 shows that the primary disk of mirrored volume $DISK00:
•
Is in slot 0 of the disk module (Disk Device ID)
•
Has a primary path that is controlled by the adapter in slot 53
•
Has a backup path that is controlled by the adapter in slot 54
INFO DISK, CONFIG Report Information
The following subsections describe the fields displayed in an INFO DISK, CONFIG
report (see Example 3-4). The first line of the report displays the name of the disk
volume whose configuration information is displayed.
Common Disk Configuration Information:
The following describes the common disk configuration information listed in an INFO
DISK, CONFIG report such as the one displayed in Example 3-4 on page 3-10.
Disk Type Specific Information:
The following describes the disk type specific information listed in an INFO DISK,
CONFIG report such as the one displayed in Example 3-4 on page 3-10.
* indicates an attribute whose value you can change with the SCF
ALTER DISK command. For more information, see the SCF
Reference Manual for the Storage Subsystem.
BackupCpu shows the processor number of the processor for the backup disk
process.
HighPin shows whether the disk process can run at a high PIN (ON) or must
run at a low PIN (OFF). The PIN is the process identification
number.
PrimaryCpu shows the processor number of the processor for the primary disk
process.
Program shows the object file name of the disk process.
StartState shows whether the disk process is configured to be started (in the
STARTED state) or stopped (in the STOPPED state, substate
DOWN) when the system is loaded.
* indicates an attribute whose value you can change with the
SCF ALTER DISK command. For more information, see the
SCF Reference Manual for the Storage Subsystem.
AuditTrailBuffer
(MB)
shows the audit-trail buffer size in megabytes (MB) for an audit
volume. This value is used to improve the performance of
systems using the Remote Duplicate Database Facility (RDF).
AutoRevive This attribute does not apply to external disk drives. For other
details about this attribute, see SCF Reference Manual for the
Storage Subsystem.