6760 ServerNet/DA Manual

Operating the 6760 ServerNet/DA
6760 ServerNet/DA Manual—424879-003
4-10
Viewing Status Information About Devices
Viewing Status Information About Devices
Use the SCF STATUS command to display status information about the devices
attached to a 6760 adapter.
Example: STATUS DISK Detailed Report
The following SCF command produces a detailed status report about a disk drive, such
as the one shown in Example 4-4.
-> STATUS $DISK00, DETAIL
This detailed report shows that $DISK00:
•
Is a mirrored volume (has primary and mirror paths listed in the Path field)
•
Has both primary and mirror paths active (Status field)
•
Is made up of two 4-gigabyte 4570 disk drives (Drive Type field)
•
Is in storage pool $POOL01 (Pool Information)
Example 4-4. STATUS DISK, DETAIL Display
STORAGE - Detailed Status DISK \ALM171.$DISK00
Disk Path Information:
LDev Path Status State Substate Primary Backup
PID PID
97 PRIMARY ACTIVE STARTED 0,268 1,266
97 BACKUP INACTIVE STARTED 0,268 1,266
97 MIRROR ACTIVE STARTED 0,268 1,266
97 MIRROR-BACKUP INACTIVE STARTED 0,268 1,266
General Disk Information:
Device Type........... 3 Device Subtype........... 41
Primary Drive Type.... 4570 Mirror Drive Type........4570
Physical Record Size.. 4096 Priority................. 220
Library File..........
Program File.......... $SYSTEM.SYS00.TSYSDP2
Protection............ MIRRORED
Pool Information:
Autoselect............ ON Pool..................... $POOL01
Physvolselect......... ON
Usage Information:
Capacity (MB)......... 4238.96 Free Space (MB).......... 1524.41 (35.96%)
Free Extents.......... 105 Largest Free Extent (MB). 1504.11
Hardware Information:
Device Location Power Physical Status
(group,module,slot)
PRIMARY (1,1,13) DUAL PRESENT
MIRROR (1,1,14) DUAL PRESENT
Persistent Write Verify Information:
Path PWV Status
PRIMARY OFF
BACKUP OFF
MIRROR OFF
MIRROR BACKUP OFF