6760 ServerNet/DA Manual

Operating the 6760 ServerNet/DA
6760 ServerNet/DA Manual—424879-003
4-14
Example: STATUS TAPE Detailed Report
Example: STATUS TAPE Detailed Report
The following SCF command produces a detailed status report about a tape drive,
such as the one shown in Example 4-5.
-> STATUS TAPE $TAPE0, DETAIL
This detailed report shows that $TAPE0 is:
•
Logical device 103 (LDev field)
•
In the STARTED state (State field)
•
Currently online and at the beginning of tape (Device Status field)
•
A tape drive with a 36-track tape cartridge loaded (Media Type field)
STATUS TAPE Detailed Report Information
The following subsections describe the fields displayed by the STATUS TAPE, DETAIL
command, such as the report displayed in Example 4-5
.
Tape Process Information:
The following tape process information is listed in the report produced by the STATUS
TAPE, DETAIL command.
Example 4-5. STATUS TAPE, DETAIL Display
STORAGE - Detailed Status TAPE \ALM171.$TAPE0
Tape Process Information:
LDev State Primary Backup DeviceStatus
PID PID
103 STARTED 0,280 1,270 ONLINE, BOT
Tape I/O Process Information:
Library File.......
Program File....... $SYSTEM.SYS00.OTPPROCP
Current Settings:
ACL................ INSTALLED Buffer Level...... RECORD
Checksum Mode...... NORMAL I/O *Compression....... OFF
*Density............ 38000 Media Type........ 36-TRACKS
Opens.............. 0 *RecSize........... 2048
Short Write Mode... ALLOWED, PADDED SubType........... 9
Volume Switching... TRANSPARENT
LDev shows the logical device number for the tape drive. This number is
arbitrarily assigned to a device when you configure the device and
every time the system is loaded.
State shows the current SCF state of the tape drive. For a list of tape drive
states, see the SCF Reference Manual for the Storage Subsystem.
Primary PID shows the processor number and PIN of current primary tape
process.