6763 Common Communication ServerNet Adapter Installation and Support Guide

Introduction
6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
1-14
External Indicators
Note that the PCI Vendor ID is 0x10E3 and the PCI Device ID is 0x860 meaning
that the PIC on the SAC of the CCSA named C2153 is an SS7TE or SS7TE1 PIC.
(These fields display Unknown if the SAC is not STARTED.)
The following example shows the output for INFO SAC DETAIL command for an
adapter that includes an SS7TE2 PIC:
Note that the PCI Vendor ID is 0x107E and the PCI Device ID is 0x9052. This means
that the PIC on the SAC of the CCSA named C2153 is an SS7TE2 PIC. (These fields
display Unknown if the SAC is not STARTED.)
External Indicators
The CCSA, the SS7TE2, and the SS7TE3 each have their own external indicators. The
SS7TE and SS7TE1 PICs do not have external indicators.
CCSA External Indicators
The CCSA external indicators consist of two status LEDs, power on and fault (shown in
Figure 1-8), which are controlled by the Service Processor (SP) and which indicate the
state of the CCSA:
Example 1-2. INFO SAC DETAIL Command Showing an SS7TE2 PIC
-> INFO SAC $ZZLAN.C2153.0 , DETAIL
SLSA Detailed Info SAC \SYS.$ZZLAN.E2153.0
*AutoFirmup............ ON
AutoReload............ ON
*AutoStart............. ON
*AutoDump.............. ON
*AccessList............ ( 3, 2, 1, 0 )
*DlFilename............ C7957P00
*FirmwareFilename...... C7824R00
*DumpFilename.......... C7957D00
SAC Type.............. CCSA SAC
Owner CPU............. 3
SvNet ID.............. 0x000010E1
Download Version...... T7957G02^01MAY97^18MAR97
Firmware Revision..... T7824G01^21JAN97^21JAN97
Firmware File Rev..... T7824G01^21JAN97^21JAN97
PCI Vendor ID......... 0x0000107E
PCI Device ID......... 0x00009052
LED CCSA State
Green Power-on
Amber Fault condition