6763 Common Communication ServerNet Adapter Installation and Support Guide

Installing a CCSA
6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
2-9
Install the CCSA
8. For the SS7TE or SS7TE1 PIC, starting at the bottom (to prevent having cables
hanging in your way), connect the splitter cables to the 80-pin ports on the CCSA.
Connect the other ends of the cables to your customer termination equipment.
9. For the SS7TE2 PIC, connect the RJ-48C cable from your customer termination
equipment to the LT (line termination) port on the top SS7TE2. Using two-foot
crossover cables, daisy-chain the NT (network termination) port on the top
SS7TE2 to the LT port on the next SS7TE2. Continue daisy-chaining the ports on
the SS7TE2s until you reach the last NT port. The last NT port can be used to
connect to the top LT port on another SS7TE2 PIC on another CCSA.
Figure 2-3 on page 2-10 shows cabling (daisy-chaining) on a CCSA containing four
SS7TE2 PICs and Figure 2-4 on page 2-10 shows cabling for a CCSA that has two
SS7TE3 PICs.
VST118.vsd