6763 Common Communication ServerNet Adapter Installation and Support Guide

Contents
6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
iii
4. Relocating a CCSA (continued)
4. Relocating a CCSA (continued)
Remove and Relocate the CCSA 4-4
Review Standard Operating Practices 4-4
Remove the Adapter 4-4
Move the CCSA and Install It in Its New Slot 4-4
Verify the Installation of the CCSA 4-4
Resume Operations 4-4
Complete the Configuration Form 4-4
Add and Start the CCSA Using SCF 4-5
Troubleshooting 4-5
A. CCSA Configuration Form
B. SS7TE2 and SS7TE3 Pinouts and Cable Requirements
SS7TE2 and SS7TE3 Connector Pinouts B-2
Safety and Compliance
Glossary
Index
Examples
Example 1-1. INFO SAC DETAIL Command Showing an SS7TE or SS7TE1
PIC 1-13
Example 1-2. INFO SAC DETAIL Command Showing an SS7TE2 PIC 1-14
Example 2-1. ADD LIF and ADD PIF Commands For Adapter C2153 2-13
Example 2-2. SCF STATUS Commands 2-15
Example 3-1. SCF INFO ADAPTER Command 3-4
Example 3-2. SCF STATUS LIF Command 3-5
Example 3-3. SCF STATUS ADAPTER Command 3-6
Example 3-4. SCF STATUS ADAPTER command 3-10
Example 3-5. SCF STATUS SAC command 3-10
Example 3-6. SCF STATUS PIF command 3-10
Example 3-7. SCF STATUS LIF command 3-11
Figures
Figure 1-1. CCSA Slot Locations 1-2
Figure 1-2. Relationship to the SLSA Subsystem 1-5
Figure 1-3. CCSA With 80-Pin Connectors and Splitter Cables 1-9
Figure 1-4. CCSA Cabling Scheme for Four SS7TE2s 1-10