6763 Common Communication ServerNet Adapter Installation and Support Guide

Replacing a CCSA
6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
3-5
Abort the CCSA
Abort the CCSA
1. Use the SCF ABORT LIF command for each LIF to stop access to the LIF
associated with the CCSA to be replaced.
ABORT LIF $ZZLAN.lif-name
2. Use the SCF STATUS LIF command to verify that the associated LIF is in the
STOPPED state (see Example 3-2).
STATUS LIF $ZZLAN.*
3. Abort the CCSA object and its subordinate objects by using one of these methods:
•
Use the SCF ABORT ADAPTER command with the SUB ALL option.
ABORT ADAPTER $adapter-name, SUB ALL
The SUB ALL option aborts the ADAPTER object and all its subordinate
objects
•
Use the OSM Service Connection:
1. Log on to the OSM Service Connection.
2. In the Tree pane, select the CCSA.
3. Right-click the CCSA.
4. From the menu that appears, select Actions.
5. Select Abort.
6. Click Perform action.
•
Use the TSM Service Application:
1. Log on to the TSM Service Application.
2. In the Tree pane, select the CCSA.
3. From the Display menu, select Actions.
4. Select Abort.
5. Click Perform action.
Example 3-2. SCF STATUS LIF Command
->STATUS LIF $ZZLAN.*
SLSA Status LIF
Name State Access State
$ZZLAN.L218 STOPPED UP