6763 Common Communication ServerNet Adapter Installation and Support Guide

Replacing a CCSA
6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
3-7
Unpack and Inspect the CCSA
Unpack and Inspect the CCSA
Follow the procedure described in Unpack and Inspect the CCSA on page 2-5.
Remove the Adapter
1. Disconnect the communication cable from the CCSA.
2. Put on your electrostatic discharge (ESD) wrist strap and connect the grounding
clip securely to an unpainted metal surface on the service side of the system
enclosure, such as the processor multifunction (PMF) CRU or I/O multifunction
(IOMF) CRU ventilation holes (see Figure 2-2 on page 2-6).