6763 Common Communication ServerNet Adapter Installation and Support Guide

Replacing a CCSA
6763 Common Communication ServerNet Adapter Installation and Support Guide522309-005
3-10
Start the CCSA
Using SCF to Verify that Objects Are in the STARTED State
1. Use the SCF STATUS ADAPTER command to verify the adapter is in the
STARTED state (see Example 3-4).
STATUS ADAPTER $ZZLAN.adapter-name.*
2. Use the SCF STATUS SAC command to verify that the ServerNet addressable
controller (SAC) is in the STARTED state (see Example 3-5).
STATUS SAC $ZZLAN.adapter-name.*
3. Use the SCF STATUS PIF command to verify that the physical interface (PIF) is in
the STARTED state (see Example 3-6).
STATUS PIF $ZZLAN.adapter-name.*
Example 3-4. SCF STATUS ADAPTER command
->STATUS ADAPTER $ZZLAN.C2153
SLSA Status ADAPTER
Name State
$ZZLAN.C2153.0 STARTED
Example 3-5. SCF STATUS SAC command
->STATUS SAC $ZZLAN.C2153.*
SLSA Status SAC
Name Owner State
$ZZLAN.C2153.0 0 STARTED
Example 3-6. SCF STATUS PIF command
->STATUS PIF $ZZLAN.C2153.*
SLSA Status PIF
Name State
$ZZLAN.C2153.0.A STARTED