6763 Common Communication ServerNet Adapter Installation and Support Guide

6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
4-1
4 Relocating a CCSA
This section describes how to relocate a 6763 Common Communication ServerNet
adapter (CCSA) that has been previously installed in a NonStop S-series system
enclosure.
This section includes the following topics:
Note. A CCSA can be replaced without shutting down the system.
Caution. If a previously installed CCSA and backplane connector have damaged pins, remove
the CCSA and install a filler panel (U09021) in the empty slot. Attach red tags to the filler panel
to identify the slot. Do not move the damaged CCSA to a different slot. Both the CCSA and
backplane (or enclosure) must be replaced. If the backplane must be replaced, contact your
service provider.
Prepare to Relocate a CCSA Page 4-2
Remove and Relocate the CCSA Page 4-4
Resume Operations Page 4-4
Note. Whenever you handle a CCSA, you should follow standard operating practices to avoid
damage to the equipment. See Review Standard Operating Practices on page 2-3.