6763 Common Communication ServerNet Adapter Installation and Support Guide

Relocating a CCSA
6763 Common Communication ServerNet Adapter Installation and Support Guide—522309-005
4-3
Print the CCSA Configuration Form
Print the CCSA Configuration Form
Follow the procedure described in Print the CCSA Configuration Form on page 3-3.
Redirect or Stop Any Applications Using the CCSA
Follow the procedure described in Redirect or Stop Any Applications Using the CCSA
on page 3-4.
Determine the Physical Location of the CCSA
Follow the procedure described in Determine the Physical Location of the CCSA on
page 3-4.
Abort the CCSA
Follow the procedure described in Abort the CCSA on page 3-5.
Locate the New Slot
1. Find the CCSA to be relocated and the empty slot where you will relocate it:
a. Find the group, module, and slot containing the CCSA to be relocated.
b. Find the empty slot where you will relocate the CCSA. The empty slot contains
a double-high filler panel. Figure 1-1 on page 1-2 shows the CCSA slot
locations.
2. Remove the double-high filler panel from the slot where you are relocating the
CCSA. Set aside the filler panel. You will reinstall the filler panel in the slot left
vacant by the CCSA you move.
Label the Communications Cables Connected to the CCSA
Follow the procedure described in Label the Communications Cables Connected to the
CCSA on page 3-6.