9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Configuring the Compaq System for the 9710 Automated Cartridge Subsystem
6-19
• MULTIFUNCTION_CONTROLLERS paragraph (to add an
MFC only)
• CONTROLLERS paragraph
• PERIPHERALS paragraph
• ALLPROCESSORS paragraph
For more information about the Install program, the CONFTEXT
file, or configuring tape controllers, see the following manuals:
• NonStop Himalaya K10000/K20000 Planning and
Configuration Guide
• NonStop Himalaya K1000/K2000 Planning and Configuration
Guide
• NonStop Himalaya K100 Server Planning and Configuration
Guide
• NonStop Cyclone/R and CLX System Planning and
Configuration Guide
• NonStop Cyclone System Configuration Guide
• Configuring Controllers for NonStop Systems
• System Generation Manual
• System Generation Manual for Disk and Tape Devices
• Install User’s Guide
6.5.1 Configuration Alerts
Before configuring the subsystem be aware that:
• The T16/5155 DLTtape Drive FRU requires release D20.00
or later of the Guardian NonStop Kernel operating system.
• The MFC requires release D20.02 or later of the Guardian
NonStop Kernel operating system.
• Type 4 subtype 9 is used to configure the T16/5155/5159
DLTtape Drive FRU.