9710 (StorageTek) Addendum for NonStop Servers

Configuring the 5155/5159 Digital Linear Tape FRU for the Himalaya S-series Servers 7-1
12
7
Configuring the 5155/5159 Digital
Linear Tape FRU for Himalaya S-
Series Servers
7.1 In This Chapter
Chapter 7 includes the following main topics and sections:
Topic Section
Prepare for the Installation
Install the 5155/5159 DLTtape Drive FRU
Configure the 5155/5159 DLTtape Drive FRU
Connect the Cables
Test the Installation
5155/5159 Troubleshooting Chart
7.2
7.3
7.4
7.5
7.6
7.7
7.2 Prepare for the Installation
This section describes how to configure the 5155/5159 cartridge
tape FRU contained within the 9710 Automated Cartridge
Subsystem including setup, site setup and guide lines for a
successful installation.
7.2.1 Before Starting
Installing the 5155/5159 DLTtape FRU into the 9710 Automated
Cartridge Subsystem requires no special tools. If the ID switch
setting on the rear panel needs to be changed, a pen will be needed.
Figure 7-1 shows the 5155/5159 DLTtape FRU.