9710 (StorageTek) Addendum for NonStop Servers

Addendum tot he StorageTek 9710 for the Tandem Environment
Configuring the 5155/5159 Digital Linear Tape FRU for the Himalaya S-series Servers 7-3
7.3 Installing the 5155/5159 DLTtape FRU
To install the 5155/5159 Tape FRU:
Step Action
1 Note the 5155/5159 factory Id setting, by locating the ID
selection switch on the rear of the unit. The factory ID is set
to 5.
2 Review the configuration guidelines in Section 2.4.1.
3 Configure the 5155/5159 for use on the system:
If there us a need to … See Section …
Change the SCSI ID 2.4.3
4 Connect the cables.
7.4 Configure the 5155/5159 DLTtape Subsystem
This section describes configuration guidelines for the 5155/5159
Tape Subsystem including SCSI ID settings. The 5155/5159
DLTtapeSubsystem is factory set to SCSI ID 5, unless otherwise
specified.