9710 (StorageTek) Addendum for NonStop Servers

Addendum tot he StorageTek 9710 for the Tandem Environment
Configuring the 5155/5159 Digital Linear Tape FRU for the Himalaya S-series Servers 7-9
7.6 Copper SCSI Cable (PMF CRU Only)
The Cable used to connect the tape drive FRU to the PMF CRU is
a copper SCSI cable.
One end of the cable has a 50-pin connector with latch-clip flanges
that connects to the uncapped SCSI port at the rear of the tape
drive FRU. The other end of the cable has a 68-pin connector with
thumbscrews that connects to the SCSI passthrough terminator on
the PMF CRU differential SCSI port.
Note: The SCSI passthrough terminator is preinstalled on the
differential SCSI port.
Caution
Do not use an MFC-style copper cable for
connecting a tape drive FRU to a PMF CRU.
Table 7-1 Copper SCSI Cables for the 5155/5159 Digital LinearTape
Subsystems.
Part Number
Description
13166 10-foot (3 meter) copper SCSI cable
13167 25-foot (8 meter) copper SCSI cable
13168 50-foot (16 meter) copper SCSI cable
13169 75-foot (23 meter) copper SCSI cable