9710 (StorageTek) Addendum for NonStop Servers

Addendum tot he StorageTek 9710 for the Tandem Environment
Configuring the 5155/5159 Digital Linear Tape FRU for the Himalaya S-series Servers 7-17
Issue the SCF INFO TAPE command after the ADD TAPE command is
finished to verify that the tape drive has been properly configured. For
example:
->INFO TAPE $TAPE0, DETAIL
Storage - Detailed Info TAPE configuration $TAPE0
Adapter Name…………$ZZSTO.#PMF.GRP-2.MOD-1.SLOT-55
*Adapter Location (Group, Module, Slot). (2, 1, 55)
*BackupCpu………………… 1
*Compression…………… ON
*Density…………………… 6250
*DeviceID……………………5
*HighPin…………………… ON
*NumOpeners……………… 2
*PrimaryCpu……………… 0
*Program…………………… $SYSTEM.SYS00.OTPPROCP
*Recsize…………………… 8192
*StartState……………… STARTED
SubType…………………… 9
Type………………………… 4
The following ADD TAPE command adds a 5190, 5155/5159,
5150 or a 5151 tape drive connected to the PMF CRU in group 02,
module 1, and slot 50 to the system configuration using the name
$TAPE1:
->ADD TAPE $TAPE1, SENDTO STORAGE, LOCATION (2,1,50),&
->PRIMARYCPU 2, BACKUPCPU 3,
For more information on the ADD and INFO commands, see the
SCF Reference Manual for the Storage Subsystem.
Example 2: Changing the Values of Tape Drive Attributes
Use the SCF ALTER TAPE command to change the attribute
values for a tape drive attached to the system. The ALTER
command changes only the attributes specified in the command.