9710 (StorageTek) Addendum for NonStop Servers

Configuring the 6760 ServerNet/DA and Attached Devices 8-1
8
Configuring the 6760 ServerNet/DA and
Attached Devices
8.1 In This Chapter
Chapter 8 includes the following main topics and sections:
Topic Section
Configuring a 6760 Adapter
Configuring Tape Drives Online Using SCF
Viewing Configuration Information about a 6760 Adapter
Viewing Configuration Information about Devices
Viewing Status Information about Devices
Troubleshooting Configuration Problems
8.2
8.3
8.4
8.5
8.6
8.7
8.2 Configuring a 6760 Adapter
A 6760 adapter does not need to be configured. When a 6760
adapter is installed in an appropriate slot, it is automatically added
to the system configuration database. The name of the adapter is
derived by combining the name of the storage subsystem manager
process ($ZZSTO), the adapter type (denoted SNDA), and the
physical location of the adapter. For example, a 6760 adapter
located in group 1, module 1, slot 53 would have the name:
$ZZSTO.#SNDA.GRP-1.MOD-1.SLOT-53
This name can be used in the SCF STATUS and SCF INFO
commands, and it is displayed in the resulting reports of these
commands.