9710 (StorageTek) Addendum for NonStop Servers

9710 ACS Automated Cartridge Subsystem Addendum for the Tandem Environment
Configuring the 6760 ServerNet/DA and Attached Devices 8-3
8.4 Viewing Configuration Information About a 6760 Adapter
Use the SCF INFO ADAPTER command to display configuration
information about a 6760 adapter.
8.4.1 INFO ADAPTER Summary Report Information
The following describes the fields in an INFO ADAPTER
summary report:
Location shows the physical location of the adapter (group,
module, and slot)
Access List shows the processor numbers of the processors that
can access this adapter
8.4.1.1 Example : INFO ADAPTER Summary Report
To display a summary report about all 6760 adapters on the server,
issue this command:
-> INFO ADAPTER $ZZSTO.#SNDA*
STORAGE – Info ADAPTER \ALM171.$ZZSTO.#SNDA.GRP-1.MOD-1.SLOT53
Location Access List
(1,1,53) 0,1,3,4,5,6,7,8,9,10,11,12,13,14,15
STORAGE – Info ADAPTER \ALM171.$ZZSTO.#SNDA.GRP-1.MOD-1.SLOT54
Location Access List
(1,1,54) 0,1,3,4,5,6,7,8,9,10,11,12,13,14, 15
8.4.2 INFO ADAPTER Detailed Report Information
The following subsections describe the fields displayed by the
INFO ADAPTER, DETAIL command, as shown in Figure 8-1.
The first line of the report displays the name of the adapter whose
detailed configuration information was requested.