9710 (StorageTek) Addendum for NonStop Servers

9710 ACS Automated Cartridge Subsystem Addendum for the Tandem Environment
Configuring the 6760 ServerNet/DA and Attached Devices 8-4
8.4.2.1 Adapter Information
The following information is listed in the beginning of a detailed
report such as the one displayed in Figure 8-1.
Access List shows the processor numbers of the processors that
can access this adapter.
Adapter Name shows the logical name of the adapter. This name
is based on the adapter location and is determined
by the system when the adapter is automatically
added to the system configuration.
Location shows where the adapter is located.
(Group,
Module, Slot)
8.4.2.2 ServerNet Addressable Controllers
The following information is listed in a detailed report like the one
that is displayed in Figure 8-1 for each ServerNet addressable
controller (SAC) located on the adapter. (Information is displayed
differently for some adapter types.)
SAC shows the name of the SAC. This name is derived
by combining the adapter type and the physical
locations of the adapter and SAC.
SAC ID shows the SCSI address of the SAC in the adapter.
For SCSI devices, this address is either 6 or 7. For
fiber-optic devices, the SAC ID is the same value
used in the sub-device field.