9710 (StorageTek) Addendum for NonStop Servers

9710 ACS Automated Cartridge Subsystem Addendum for the Tandem Environment
Configuring the 6760 ServerNet/DA and Attached Devices 8-9
8.5.2 Example: INFO TAPE Detailed Report
To view detailed configuration information about a tape drive, use
the SCF INFO TAPE, DETAIL command. The following
command produces a report such as the one shown in Figure 8-2.
-> INFO TAE $TAPE), DETAIL
STORAGE – Detailed Info TAPE configuration \ALM171.$TAPEE0
AdapterName………………………………………………………… $ZZSTO.#SNDA.GRP-1.MOD-1.SLOT-54
*Adapter Location(Group,Module,Slot)…(1,1,54)
*Backup CPU…………………………………………………………… 1
*Compression………………………………………………………… ON
*Density…………………………………………………………………… 6250
*DeviceID………………………………………………………………… 5
*HighPIN…………………………………………………………………… ON
*MaxOpens………………………………………………………………… 2
*PrimaryCPU…………………………………………………………… 0
*Program…………………………………………………………………… $SYSTEM.SYSTEM.OTPPROCP
*RecSize…………………………………………………………………… 2048
*SAC Name………………………………………………… $ZZSTO.#SNDA.SAC-1.GRP-1.MOD-1.SLOT-54
*StartState…………………………………………… STARTED
Figure 8-2 INFO TAPE, DETAIL Display
This report shows that $TAPE0:
• Is controlled by a 6760 adapter (denoted as SNDA)
• Has processor 0 assigned as the primary processor
For other details concerning this display, see SCF Reference
Manual for the Storage Subsystem.
8.6 Viewing Status Information About Devices
The SCF STATUS ADAPTER command can also be used to
display status information about devices attached to the 6760
adapter. Status information includes the current stated of each
device. For examples, see Viewing Status Information About a
6760 Adapter and Viewing Status Information about Devices.