9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-5
The following are examples of the STATUS ADAPTER command:
• To produce a summary report for the processor multifunction (PMF)
CRU adapter in group 01, module 1, and slot 50, type:
-> STATUS ADAPTER $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
• To produce a summary report for all IOMF CRUs in group 11, type:
-> STATUS ADAPTER $ZZSTO.#IOMF.GRP-11.*
• To produce a detailed report for the PMF CRU adapter in group 01,
module 1, and slot 55, type:
-> STATUS ADAPTER $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55, DETAIL
• To produce a summary report for the 6760 ServerNet device adapter in
group 01, module 1, and slot 53, type:
-> STATUS ADAPTER $ZZSTO.#SNDA.GRP-1.MOD-1.SLOT-53
STATUS DISK Command
This subsection describes the details about the STATUS DISK command
for magnetic disks and virtual disks. The command syntax is:
STATUS DISK $ volume-name [ -P | -B | -M | -MB | -* ]
$ volume-name
specifies the name of the disk volume.
-P | -B | -M | -MB | -*
specifies whether the path is the primary (-P), backup (-B), mirror
(-M), mirror backup (-MB), or all paths (-*).
Wild-card characters are supported.
Examples Using STATUS DISK