9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-6
The following are examples of the STATUS DISK command:
• To display the status of all disks on the system, type:
-> STATUS DISK $*
• To display the summary status of the disk $DATA00, type:
-> STATUS $DATA00
• To display the detailed status of the disk $DATA00, type:
-> STATUS $DATA00, DETAIL
• To display the summary status of the mirror disk of the mirrored
volume $DATA00, type:
-> STATUS $DATA00-M
Comparing PUP Commands With STATUS DISK
The SCF STATUS DISK command for magnetic disks replaces part of the
PUP LISTDEV command. Table 9-1 compares PUP commands with the
SCF STATUS DISK command.
Table 9-1 PUP Command Replaced by SCF STATUS DISK Command
PUP Command SCF Command
LISTDEV TYPE DISK STATUS DISK
STATUS MON Command
This subsection describes the details about the STATUS MON command.
The command syntax is:
STATUS MON $mon name
Wild-card characters are supported.