9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-8
Examples Using STATUS POOL
The following are examples of the STATUS POOL command:
• To display the summary status of all storage pool processes beginning
with the letters POOL, type:
-> STATUS POOL $POOL*
• To display the summary status of all storage pool processes in the
STOPPED state only, type:
-> STATUS POOL $*, SEL STOPPED
• To display the detailed status of the tape $POOL00, type:
-> STATUS $POOL00, DETAIL
Comparing PUP Commands With STATUS POOL
The SCF STATUS POOL command replaces part of the PUP LISTDEV
command. The table 9-3 compares PUP commands with the SCF
STATUS POOL command.
Table 9-3 PUP Command Replaced by SCF STATUS POOL Command
PUP Command SCF Command
LISTDEV TYPE 25 STATUS POOL
STATUS SCSI Command
This subsection describes the details about the STATUS SCSI command
for Open SCSI devices. The command syntax is:
STATUS SCSI $ device-name [ -P | -B ]
$ device-name
specifies the name of the Open SCSI I/O process.
-P | -B