9710 (StorageTek) Addendum for NonStop Servers
Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-20
START MON Considerations
Before using the START MON command, consider the following:
• Before using the START MON command, verify that:
♦ The MON name specified must have a configuration record (can be
displayed using the INFO command).
♦ The NonStop Transaction Manager/MP (TM/MP) product must be
running on the system.
♦ The volume specified as the CATALOGLOCATION for the MON
process must be in the STARTED state, and must be enabled by the
NonStop Transaction Manager/MP (TM/MP) product.
• Use the STATUS command to verify that the MON process has been
started.
• The MON process must be in the STARTED state in order to carry out
most commands for virtual disks and for storage pool processes.
• If the MON process is in the SERVICING state, use the RESET MON
command followed by START MON to restart the MON process.