9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-22
Examples Using START POOL
The following are examples of the START POOL command:
• To start all storage pool processes available on the system, type:
-> START POOL $*
• To start $POOL00 in the SPECIAL state, type:
-> START $POOL00, SPECIAL
START POOL Considerations
Before using the START POOL command, consider the following:
• Before using the START POOL command, verify that:
♦ The storage pool process name must have a configuration record
and a definition with the SMF master process (can be displayed
using the INFO or STATUS commands).
♦ The NonStop Transaction Manager/MP (TM/MP) product must be
running on the system.
♦ The following must be in the STARTED state:
1. The SMF master process ($ZSMS).
2. The volume specified as the CATALOGLOCATION for the
MON process (must also be enabled by the NonStop
Transaction Manager/MP (TM/MP) product).