9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-30
object-spec
specifies one of the following combinations of object type and
object name:
Object Type Object Name
DISK $ disk-name
DISK $ disk-name-path
MON $ mon-name
POOL $ pool-name
SCSI $ device-name
SCSI $ device-name-path
TAPE $ tape-name
Wild-card characters are supported.
STOP DISK Command
This subsection describes the details about the STOP DISK command. The
STOP DISK command terminates access to a disk. The command syntax is:
STOP DISK { $ volume | $ ldev } [ -P | -B | -M | -MB ]
$ volume | $ ldev
specifies the name or logical device number of the disk volume.
-P | -B | -M | -MB
specifies whether the path being stopped is the primary (-P), backup
(-B), mirror (-M), or mirror backup (-MB).
Wild-card characters are supported.