9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-34
Comparing PUP Commands With STOP MON
In the G-series releases, the SCF STOP MON command replaces a PUP
command. The following table compares PUP command with the SCF
STOP MON command.
Table 9-12 PUP Command Replaced by SCF STOP MON Command
PUP Command SCF Command
DOWN [ ! ] STOP MON [ , FORCED ]
For a complete list of all PUP commands and equivalent SCF commands
for the storage subsystem, see PUP Commands and Equivalent SCF
Commands in the SCF Reference Manual for the Storage Subsystem.
STOP POOL Command
This subsection describes the details about the STOP POOL
command. The STOP POOL command stops access to the specified
storage pool. The command syntax is:
STOP POOL { $ pool-name | $ ldev }
$ pool-name | $ ldev
specifies the name of the storage pool process that is to be
stopped.
Wild-card characters are supported.