9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek™ 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape CRE and NonStop Kernel
9-60
Himalaya K10000 and K20000 Tape Loads
Using the RMI terminal to load the system image from the SIT tape
is referred to as a Tape Load. To use a 5155, 5159, 5150 or 5151
attached to an MFC as the tape load device, verify that:
• The MFC is installed in an MF-8 I/O cabinet configured with
processors 0 and 1 (using the same processor pair as
$SYSTEM).
• $SYSTEM is configured on a pair of 42xx disk drives in the
same MF-8 I/O cabinet with the MFC.
• $SYSTEM disks are attached to the same MFC that the tape
drive is attached to.
• The MFC and tape device are properly configured in the system
configuration file.