9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
The 5155/5159 Digital Linear Tape FRU and TMDS for K-series Servers
10-4
10.2.3 TAPE Subsystem Help Subjects
For help with the TAPE subsystem, enter any of the following
commands at the TAPE> prompt to display detailed information:
HELP TAPE Introduces the TAPE subsystem
commands and help subjects and gives
examples of TAPE HELP commands.
HELP CHANGES Lists the major additions and changes to
the TAPE subsystem software in the
current software release.
HELP COMMANDS Lists and briefly defines the TAPE
subsystem commands.
HELP command-name Describes a particular TAPE subsystem
command: tells what the command does
and what its parameters and their legal
values are and explains its syntax.
HELP EVENTS Lists and briefly describes the TAPE
subsystem events that are sent to the
event log.
HELP event-name Tells the meaning of the specified event
and, if applicable, suggests action to take
in response to the event.
HELP EV event-
number
Gives the same information as “HELP
event-name” except the event is
specified by number rather than by name.
(For example, HELP EV316.)