9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
2
System requirements
Hardware Any NonStop Himalaya, Cyclone,
CLX800 or S-Series Server.
Software supported Guardian NonStop Kernel, any
software release, D20.02 or later.
Controller 3216 fiber optic channel controller,
Multifunction Controller, MFC,
PMF, or ServerNet DA with either
S-SAC or F-SAC for S-Series.
Visual Inspection
1. Are the AC power cables connected to 9710ACS-X?
2. Is AC power connected to an AC source?
Note: 9710ACS-A and the 9710ACS-B contain autoranging
power supplies.
If the Operator Panel is not on, or your system does not recognize the
9710ACS Tape Cartridge Silo Subsystem:
• Ensure the power plug attachment to the 9710ACS Tape
Cartridge Silo Subsystem is secure.
• Verify AC power is available at 9710ACS Tape Cartridge Silo
Subsystem.
3. Is AC power switch set to On?
4. System Connection: