9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment

7. Are the SCSI ID(s) set correctly on the 9710ACS Tape Cartridge Silo

Subsystem? The ID selection switch is located at the rear of the

unit(s). Depressing the button on either the top (decrement) or

depressing the button on the bottom (increment) of the ID indicator

makes ID selection.

A) MFC attachment supports tape device ID 5 ONLY.

B) All other configurations support both tape device ID’s 4 and

Note: Be sure the selected ID (4 and/or 5) is a valid ID in the SYSGEN or

COUP configuration. S-Series, verify TAPE STATUS using SCF.