9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment

Yellow LED on a BEB Not Lit

Symptom Corrective Action

1. Yellow LED not lit inside

BEB enclosure.

• Make sure that both the drive FRU

and 3216 logic board are powered

on.

• Check the integrity of the fiber-

optic cable connection:

1. Inspect the cable connectors at

the BIC and BEB ends. Make

sure the connectors have not

been forced in backwards. The

connector keyway must mate

with the key in the receptacle.

2. Replace or inspect the cable for

defects or kinks.

3. Make sure the cable maximum

bend radius of 10 centimeters (4

inches) has not been exceeded.

4. If the yellow LED still does not

light, replace the BIC FRU.

If the 9710ACS Tape Cartridge Silo Subsystem fails TMDS Quick Tape

Test. Replace the tape drive FRU. Call StorageTek: see “StorageTek

9710 Compaq Support Program.”