9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Unpacking the 9710 Automated Cartridge Subsystem and the Himalaya K-series Controllers 2-3
casters, allowing it to move easily down the ramp and into
position.
A. Inspect for scratches, rust, or shipping damage.
B. The following items are needed:
• Drive FRU(s) with User’s kit box containing data
cartridge, cleaning cartridge, power cord and Read Me
First card
• 9710 ACS Tape Subsystem with User’s kit box
containing manuals, AC power cord, Bar Code Labels,
Key and Read Me First card
• Sun Server, ACSLS, Solaris and Manual
• Box containing an MFC RS-232/SCSI BIC and copper
cable for each drive FRU to be connected to an MFC
8. Box containing a 3216 controller logic board, 3216 BIC,
fiber-optic cable, and BEB enclosure for drive FRUs to be
connected to a 3216 tape controller.
9. Move the 9710 ACS Tape Subsystem into place. Note the
service clearance information under “Service Clearance and
Dimensions” refer to Figure 2.3.
10. Chalk the cabinet caster wheels when the 9710 ACS is in
the desired location. This procedure maybe delayed until
the cable installation is complete.
11. Connect the AC power cords to the AC input. Observe
proper AC input for proper voltage.