9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Unpacking the 9710 Automated Cartridge Subsystem and the Himalaya K-series Controllers 2-5
Note. Record any damage on the waybill. Report any damaged equipment
to Compaq Computers Incorporated. Failure to report damaged equipment
immediately can result in a loss of claim.
2.5 Cables and the 5155/5159 Drive FRU
This subsection describes how to attach cables to the 5155/5159
DLTtape Drive FRUs contained in the 9710 ACS Tape
Subsystem to the host computer. Not all topics in this subsection
apply to both controllers. See the following:
For an MFC, read these topics: For a 3216 tape controller, read:
“Drive Placement and the SCSI ID” “Drive Placement and the SCSI ID”
“Drive Configurations” “Drive Configurations”
“Rear of the Module” “Rear of the Module”
“Installing the BEB (3216 Only):
“Connecting and Routing the Power
Cords”
“Connecting and Routing the Power
Cords”
“Connecting Copper Cable to the
MFC RS-232/SCSI BIC”
“Connecting Fiber-Optic Cable to the
3216 BIC”
“Connecting Copper Cable to the
Drive FRU SCSI Port (MFC Only)”
“Connecting Fiber-Optic Cable to the
5155/5159 BEB (3216 Only)”