9710 (StorageTek) Addendum for NonStop Servers

Installing and Configuring the 9710 Automated Cartridge Subsystem
3-1
3
Installing and Configuring the 9710
Automated Cartridge Subsystem
3.1 In this Chapter
Chapter 3 includes the following main topics and sections:
Topic Section
Installation Overview 3.2
Before Starting 3.3
Site Setup 3.4
Site Guidelines 3.5
Install the DLTtape drive(s) in the 9710 ACS
3.6
Configure the 9710 Automated Cartridge Subsystem 3.7
Configuration Guidelines 3.8
Changing the SCSI ID 3.9
Connect the Cables 3.10
Drive Placement and the SCSI ID 3.11
Drive Configurations 3.12
Patch Panel connections 3.13
Opening and Removing the Rear Door 3.14
Installing the BEB (3216) 3.15
Connecting and Routing the Power Cords 3.16
Connecting Copper Cable to the MC RS-232/SCSI BIC 3.17
Connecting Copper Cable to the Drive FRU SCSI PORT 3.18
Connecting Fiber-Optic Cable to the 3216 BIC 3.19
Connecting Fiber Cable to the 9710 ACS Tape 3.20
Loading the operating System Image 3.21
Placing the Tape Drives Online After Installation 3.22
The 9710 ACS Power-Up Sequence 3.23
Checking and setting the SCSI ID 3.24
Troubleshooting 3.25
3.2 Installation Overview
This Section describes how to prepare for the installation of the
9710 Automated Cartridge Subsystem including setup, site setup
and guidelines for a successful installation.