9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Installing and Configuring the 9710 Automated Cartridge Subsystem
3-5
3.6 Installing the 5155/5159 Tape Drive FRU(s) in the ACS
To install the DLTtape drive(s) in the 9710 Automated Cartridge
Subsystem:
Step Action
1 Note the 9710 ACS factory ID setting , by locating the ID selection
switch on the rear of the unit. The factory ID is set to 5.
2 Review the configuration guidelines.
3 Configure the 9710 ACS for use on the system(s):
If needing to … See section …
Change the SCSI ID 3.9
4 Connect the cables.