9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Installing and Configuring the 9710 Automated Cartridge Subsystem
3-7
3.10 Connect the Cables
Section 3.10 describes the physical connections of the DLTtape drive(s)
housed in the 9710 Automated Cartridge Subsystem, including the Rear
Panel layout, SCSI cable connections, SCSI bus termination and Power
connections. See Figure 3.2
Figure 3-2 Examine the rear panel of the 5155/5159 DLTtape drive
FRU
Examine the interface components on the patch panel of the 9710 Automated
Cartridge Subsystem to complete the physical installation (see Figure 3-3).