9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Installing and Configuring the 9710 Automated Cartridge Subsystem
3-27
CAUTION
Make sure that none of the fiber-optic cables become pinched during
installation. Fiber-optic cable should not be bent more than the maximum
bend radius of 10 centimeters (4 inches).
6. Repeat Steps 1 through 5 for each drive FRU that uses fiber-
optic cables.
7. After all of the fiber-optic cables have been installed into all of
the BEB modules, reinstall the external panel of the 9710 Tape
Subsystem.
Note: Installing the fiber-optic cable(s) behind the external panel
prevents the cable(s) and BEB(s) from becoming damaged.