9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Installing and Configuring the 9710 Automated Cartridge Subsystem
3-33
Red LED Lit on a Logic Board
Symptom Corrective Action
1. Red LED on a logic board
is lit for less than 1 minute
after the system starts.
• None; normal self-test
operation.
2. Red LED on a logic board
stays lit for more than 1
minute.
• If two drives are
attached to the same
3216 controller, make
sure that their SCSI Ids
are set to 4 and 5.
(“Checking and Setting
the SCSI ID”.)
Otherwise, call the
GCSC.