9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Configuring the Compaq System for the 9710 Automated Cartridge Subsystem
6-3
6.2.2 Identify the Controller
The following paragraphs describe how to complete the
identification lines at the top of the form. Identify an MFC by the
part number of its logic board. The part number is entered in the
logic board slot on the completed cabinet checklist for the cabinet
where the MFC is installed. Part numbers for the MFC are listed in
Table 6-2.
Table 6-2 MFC Part Numbers
Component Part Number
MFC logic board 038957
MFC RS-232/SCSI BIC 010893
• Enter the logical device name of the MFC being configured on
the Controller Name line. The MFC name is shown in the MFC
logic board slot on the completed cabinet checklist.
• Enter the controller number of the MFC on the Controller
Number line. The controller number for this MFC is shown
next to its logic board slot on the completed cabinet checklist.
• Enter the MFC logic board slot number in the first blank of the
LB/BIC Slot Number line. The slot number is shown next to
the MFC logic board slot for this MFC on the completed
cabinet checklist.
• Enter the MFC BIC slot number in the second blank of the
LB/BIC Slot Number line. The slot number is shown next to
the MFC BIC slot for this MFC on the completed cabinet
checklist.