9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Configuring the Compaq System for the 9710 Automated Cartridge Subsystem
6-4
6.2.3 J5 Connector (For a Tape Drive Only)
Complete the information block for the J5 connector of the MFC
RS-232/SCSI BIC. Indicate that are a T16/ 5155/5159 DLTtape
Subsystem is being attached. (Only one tape drive can be
connected to an MFC.)
• The unit number for the J5 connector on an MFC is always %5.
This number refers to the unit to which the device is assigned.
• Enter the logical device and subdevice name (if choosing to use
a subdevice name) of the tape drive on the Logical Device
Name line.
• Enter the room number or other appropriate locator of the tape
drive on the Physical Location of Device line.
• Enter the product number of the tape drive on the Product
Number or Description of Device line.
• Enter the cable part number on the Cable Part Number line.
Table 6-3 on shows the Compaq cable part numbers for
connecting a tape drive to the MFC.