9710 (StorageTek) Addendum for NonStop Servers

Addendum to the StorageTek 9710 for the Tandem Environment
Configuring the Compaq System for the 9710 Automated Cartridge Subsystem
6-15
6.4.3 Example 3: Defining and Adding a Device
A tape drive cannot be added to the system configuration until the
controller for the tape drive (see the preceding Examples 1 and 2)
has been added. The following example uses COUP to define and
add a tape drive name $TAPE1.
6) ASSUME DEVICE
7) SET PRODUCT 5190
8) SET CONTROLLERNAME TAPEA
9) SET UNIT 5
10) SHOW
PRODUCT 5190
CONTROLLERNAME TAPEA
IOPOBJECT $SYSTEM.SYS01.OTPPROCP
IOPLIBRARY
TYPE 04
SUBTYPE 09
RSIZE 02048
UNIT 05
HIGHPIN ON
DENSITY38000
TAPEMODESTREAM
NOCOMPRESSION
TAPE^OPENERS 4
11) ADD $TAPE1
The following are notes about the above example:
• The ASSUME command sets the object type that specification
for it for each SET command that follows is not necessary.
• The SET commands define the attributes that are wanted in the
PERIPHERALS paragraph of the CONFTEXT file:
♦ Product number
♦ Controller name
♦ Unit number