AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-58
Examples of the ALTER Command
LINE line-name | SU su-name
designates the line or subdevice whose attributes you want to alter. If you omit the
line-name or su-name, SCF alters the attributes of the assumed line or
subdevice.
attribute-spec
is a specification of an attribute and a value to be assigned to that attribute.
The attribute-spec for a LINE object is one of the following attribute name and
value combinations. The attributes are listed alphabetically and described in Section 6,
Attribute Descriptions for AM3270 and TR3271.
The attribute-spec for an SU object is one of the following attribute name and
value combinations. The attributes are listed alphabetically and described in Section 6,
Attribute Descriptions for AM3270 and TR3271.
Examples of the ALTER Command
The following command alters the line $TR3271:
ALTER LINE $TR3271, WACKIFNOREAD ON
[ BCCTYPE { LRC | CRC16 | CCITT } ]
[ CHARACTERSET { EBCDIC | ASCII } ]
[ CONTROLRTS { ON | OFF } ]
[ CONTROLSET { EBCDIC | ASCII } ]
[ DEBUG { ON | OFF } ]
[ DROPRTS { ON | OFF } ]
[ INITSTATUS status ]
[ MULTIBLOCK { ON | OFF } ]
[ OFFLINETIMER timestamp ]
[ PROGRAM file-spec ]
[ READCOMMAND { NONE | ALL | RDMOD } ]
[ RETRIES integer ]
[ SYNCS integer ]
[ TESTINT timestamp ]
[ THRESHOLD integer ]
[ TIMEOUT timestamp ]
[ TRANSLATE { ON | OFF } ]
[ TRANSPARENT { ON | OFF } ]
[ WACKDELAY timestamp ]
[ WACKIFNOREAD { ON | OFF } ]
[ XLATEIN ( char { , char }... ) ]
[ XLATEOUT ( char { , char }... ) ]
[ ADDRESS ( controller-number , device-number ) ]
[ PROTOCOL { CRT | PTP } ]
[ RECSIZE integer ]
[ TRANSPARENT { ON | OFF } ]
[ TYPE ( subdevice-type , subdevice-subtype ) ]