AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-72
Display for the STATS LINE Command
The owner of the subsystem is the user who started the subsystem or any user
whose application ID is the same as the server ID.
SUB [ ONLY | ALL | NONE ]
directs the command at a set of subordinate objects.
ONLY specifies that only the subordinate objects are affected.
ALL specifies that the named object and the subordinate objects are affected.
NONE specifies that none of the subordinate objects are affected.
If you omit subtype, ALL is assumed.
Display for the STATS LINE Command
The display for a LINE object has the following format:
The statistics are described below in the order in which they appear on the screen. The
information listed in the statistics display applies only after the last RESET and/or cold
start.
TR3271 STATS LINE $TR3271
ResetTime....... 23 Jul 1988, 09:19:57.775
SampleTime...... 23 Jul 1988, 10:16:53.199
CLB Level:
Total Frames.... 10 BCC Error..... 2
Frame Error..... 3 No Buffers.... 0
LEVEL 2:
Messages........ 100 Sent......... 50
Received........ 50
ERRORS:
Errors.......... 3 NAKs.......... 1
BCC Error....... 3 Format Error.. 0
Retries......... 10 Short Buffer.. 1
No Buffers...... 3 Timeouts...... 2
Buffer Overrun.. 2 Line Overruns. 1
Modem........... 0 Invalid Responses 2
Misc............ 2
Number of Message sent/received with respect to the size:
Less Than 256 Bytes Sent............ 100
Less Than 256 Bytes Received........ 10
Between 256 to 1024 Bytes Sent ..... 90
Between 256 to 1024 Bytes Received.. 10
Larger Than 1024 Bytes Sent......... 100
Larger Than 1024 Bytes Received..... 20