AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-88
Examples of the TRACE Command
Examples of the TRACE Command
The following command starts the trace of the line $TR3271 and directs the resulting
trace to the file $DATA.TR3TRACE.T24FEB95:
TRACE LINE $TR3271, TO $DATA.TR3TRACE.T24FEB95
The following command stops the trace of the line $TR3271:
TRACE LINE $TR3271, STOP
VERSION Command
The VERSION command displays the version level of the specified object.
Command Syntax for the VERSION Command
The VERSION command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LINE object
designates the object whose version you want to display.
DETAIL
designates the complete version information that is to be returned for the specified
object. If you omit DETAIL, only a single line of version information for the object is
displayed.
CLIPL4 23 CLIP level-4 tracing .
CLIPREQ 25 CLIP request tracing .
CLIPCTLI 28 CLIP control-input tracing .
CLIPCTLO 29 CLIP control-output tracing .
Note. Trace options can be specified as either keywords or corresponding numeric values.
SCF accepts a combination of keywords and numeric values within a TRACE command. Also,
numeric values are not verified by TR3271—an undefined value has no effect and no warning
is issued.
VERSION [ / OUT file-spec / ] [ LINE <object> ] [ , DETAIL ]
Table 4-6. Keywords and Mask Bits for the TRACE LINE Command (page 2 of 2)
Keyword Mask Meaning