AM3270 and TR3271 Configuration and Management Manual

Modifier Profiles
AM3270 and TR3271 Configuration and Management Manual—529993-001
5-12
PROGRAM name — AM and TR
PROGRAM name — AM and TR
PROGRAM is the microcode file that is downloaded from a NonStop S-series server or
an Integrity NonStop NS-series server to the SWAN concentrator. This modifier
specifies the fully qualified file name of the microcode program file to substitute for the
default file defined by the access method macro. The variable nn is the number
returned by the system after a cold load.
The value can be altered by using the SCF line attribute PROGRAM. If you use a
substitute file name, it must be a fully qualified file name.
Note that all DLCs (including AM DLC C0039P00 and TR DLC C0040P00) must be in
$SYSTEM.CSSnn. Do not copy them to another subvolume unless you configure a
TFTP process with that subvolume. For further details refer to the WAN Subsystem
Configuration and Management Manual.
RETRIES — AM and TR
This modifier specifies the number of times the I/O process tries a request before
reporting an error.
Application: SWAN Concentrator
Default: $SYSTEM.CSSnn.C0039P00 for AM3270
$SYSTEM.CSSnn.C0040P00 forTR3271
Units: na
Range: na
SCF Equivalent: same name
Application: All Cluster Controllers (AM), SWAN Concentrator (TR)
Default: 3
Units: na
Range: 1 through 15
SCF Equivalent: same name